SolverPI-Resin 6002

Product Name: Thermoplastic Polyimide Resin Item No.: SolverPI-Resin 6002 SolverPI-Resin 6002 is produced by SOLVER POLYIMIDE which has good machinability. It can be mould pressing,injection molding, extrusion molding.The themoplastic polymide can be reprocessed and mixed with graphite,carbon black,fiberglass,ceramic powder,carbon fiber,aramid fiber,metal powder,molybdenum disulfide,invisible material and so on to change its characters,producing the bearing,valve,seal part,pipe panel all kinds of mechine parts,and invisible marterial. The characteristic of SolverPI-Resin 6002 •High heat resistence.Can be long-uesd in temperature＞300℃. •Excellent lubricity.Low COFand low frictional loss. •High insulation,low Coefficient of Linear Thermal Expansion,deformation resistence,acid and alkalicresistence,salt tolerance,non-corroding. •Radiation resistant.N appearance change under the 200kGyirradiatiin of ray. Extremely low hydroscopicity.Resistence to water wapor,no hydrolysis. •Low thermalconductivity.Good thermal insulation properties,low calorific value when it runs up. •The low dielectyic constant.High impedance,no reflection to radar,good base material of invisible material. •Fire retardant level FV-level 0. The applied range of SolverPI-Resin 6002 With the superior property,the ZTS-PI-I can be used in petrochemical industry,mining machinery,precision machinery,automobile industry,micro-electronic device,medical apparatus and instruments,aviation,aerospace,guided missile,naval vessels and so on. In high speed and high pressure applications,parts with low COF and abrasion resistence. Parts with good creep resistence and low plastic deformation. Parts with good self-lubricating and good lubrication performance. Parts with high bending、stretching、striking properties Parts with high fire retardant level(no metal) Parts with wave-transparent、microwave absorpting、invisible properties. The permance index of SolverPI-Resin 6002 Terms of detection Guideposts Test standard and methods Density（g/cm³） 1.28-1.32 GB/T1033.1-2008 Bending strength(MPa)(23℃±2℃) ＞850 GB9341-2008 Flexural modulus(MPa)(23℃±2℃) ＞25000 GB9341-2008 Impact strength Unnotched(KJ/㎡)(23℃±2℃) ＞45 GB1043-1979 Impact strengrh notch(KJ/㎡)(23℃±2℃) ＞8 Compressive strength(MPa)(23℃±2℃) ＞950 GB1041-2008 Tensile strength(MPa)(23℃±2℃) ＞700 GB1040-2006 Elongation％ 5.0-7.0 GB1040-2006 Rockwell hardness（HRE） 80-100 GB9342-1988 Distortion temperature(18.6kg/㎝2)℃ ≥300 GB1634-2004 Dilatation coefficient（23-200℃），（10﹣5㎝/㎝/℃） 3.5-5.5 GB/T2572-2005 Friction coefficient（PV=0.33MPa•m/s） 0.1-0.2 GB3960-1983 Wear volume(cm3) (1.0-5.0)×10-5 GB3960-1983 Dielectric constant(1KHz) 2.0-3.0 GB1409-2006 Surface resistance(Ω) 1010-1013 GB1410-2006 Volume resistance（Ω•m） 109-1012 GB1410-2006 Note:When test the sample,you should indicate the model adopted by way of preparation (moulding, extrusion molding) is used in this standard moulding (280-380 ℃) preparation of sample Product appearance:faint yellow powder. Product specification:powder,granule,proximate matter Packing:5kg/bag,25kg/drum